Komatsu PC400 Excavator Undercarriage Parts
Pivot offers pads, sprockets, rollers, chains, idlers, and even complete undercarriages for the Komatsu PC400 Series Excavator. We also offer a four thousand hour or three-year warranty for all of our new undercarriage parts. Likewise, Pivot supplies other good used takeout, and remanufactured excavator parts as well. We attempt to offer same-day shipping to the vast majority of orders so reach out to us here at Pivot to get more information.
The Komatsu PC400 Excavator Series
PC400-1, PC400-3, PC400-5, PC400-6, PC400-7, PC400HD-5, PC400LC-1, PC400LC-3, PC400LC-5, PC400LC-6, PC400LC-7, PC400LC-7E0, PC400LC-8
About The Komatsu PC400 SERIES Excavator
The Komatsu PC400 has a massive output of 345 HP and that power can dig and move anything you put in front of it. It is EU Stage 3A emissions certified which means that the NOx emission is reduced by 40 percent. The electronically controlled High-Pressure Common Rail (HPCR) delivers power and lowers fuel usage by injecting fuel in smaller droplets, which creates a higher ratio of surface area to the volume ratio. This design is cost-effective and unlike other excavators in the field. The Komatsu PC400 Series Excavator will save you time, money, and a lot of headaches that other crawlers won’t.
Komatsu PC400 Undercarriage Parts
PC400 Sprockets
Our sprockets and segment groups are specifically designed to provide extended life and durability for the toughest working conditions. We offer sprockets for crawlers, dozers and excavators.
PC400 Rollers
PIVOT supplies the construction and mining industry with top carrier rollers along with single and double flange bottom track rollers. Our rollers are manufactured to provide excellent service in extreme operating conditions.
PC400 Idlers
We also carry a wide range of idlers that are fabricated and cast from high strength steel. This is to maintain the integrity of our product and reliability for your machine.
PC400 Track Assembly
PIVOT offers track group assemblies as well as individual track chains. Our track chains come either greased or sealed and lubricated in Standard or Heavy Duty options. All track groups can be assembled prior to shipment for your convenience and ease of install.
PC400 Track Pads
We supply a variety of arrangements when it comes to your machine’s track shoes that have been designed and tested for your specific application. All of our track pads come either with a single, double or triple grouser setup. You also have the option of with or without mud-holes, standard or extreme service, along with various widths.
PC400 Track Adjusters
PIVOT also carries several options for complete track adjuster assemblies, springs and seal kits. Our track adjusters are direct replacement for fit, form and function and have been specifically engineered to operate under extreme working conditions to keep you moving.